Treadmill maintenance

Treadmill maintenance methods

1. Before cleaning or maintaining the product, be sure to unplug the power supply of the treadmill. Check running board and belt lubrication at least once a week. 2, according to the actual frequency of use, add the right amount of running oil: if each machine is used frequently every day, more than 6 hours, then add oil once every ten days or so, each time add about 10-20ml. If each machine is used for less than 6 hours a day, add oil every 15 days or so, and add about 10-20 ml per machine. Don't overuse lubricating oil. More lubricating oil is not always better. 3, regular dust removal, keep the parts clean, can extend the service life of the treadmill. Be sure to clean the exposed parts on both sides of the running belt to reduce the accumulation of impurities under the running belt. Make sure your shoes are clean, avoid carrying foreign objects under your running straps, and wear your running board and straps. The surface of the running belt must be scrubbed with a damp cloth with soap, taking care not to splash water under the electrical components and the running belt.

1, the treadmill can not accelerate the replacement of the instrument panel; Replace the sensor; Reinstall the drive board.
2, the running belt is slipping adjust the balance bolt at the back of the running belt (turn it clockwise until it is reasonable); Adjust the fixed position of the motor.
3, treadmill automatic stop please carefully check the wiring; Check the cable; Reinstall the drive board.
4, the noise in the movement to correct or replace the cover; Remove foreign bodies; Adjust the balance of the running belt; Replace the motor.
5, the treadmill can not start to check the power supply; Replace the fuse; Replace the power switch.
6. The running belt is not on the belt to adjust the balance of the roller. 7, the operation of the motor noisy try several times; Open the upper shield and check whether the wiring is loose; Replace the three-phase plug; Put the switch back on.